Tilausrivit 0

Ahlsell Tuotteet Teollisuus Paineilma PneumatiikkaPneumaattiset- ja sähköiset ohjaimet

Pneumaattiset- ja sähköiset ohjaimet

Pneumaattiset ja sähköiset ohjaimet Festo

Liitäntärasia Festo CAPC

Liitäntärasia Festo CAPC

Tuotenumero: T18105954

Electrical connection block

Ajastin- ja nollausyksikkö Festo PZVT

Ajastin- ja nollausyksikkö Festo PZVT

Tuotenumero: T18101169

Adjustable delay times
– 0.2 … 3 s
– 2 … 30 s
– 8 … 120 s
– 20 … 300 s
Panel mounting. Mounting on H-rail to EN 60715. Protective cover.
Pneumatic timer PZVT: The timer switches input pressure applied to port 1 through to port 2 after the preset delay time has expired.
Automatic reset module PZVT-AUT: The reset module is used to automatically reset timers of type PZVT-…-SEC at the end of a preset time and to generate an output signal of defined duration for control system purposes. The timer can be reset manually by pulling the setting knob on the reset module. This allows the simple creation of pneumatic timer controls with automatically repeating time intervals.

Ajastin- ja nollausyksikkö Festo PZVT

Ajastin- ja nollausyksikkö Festo PZVT

Ajastin- ja nollausyksikkö Festo PZVT

Ajastin- ja nollausyksikkö Festo PZVT

Ajastin- ja nollausyksikkö Festo PZVT

Vahvistin/ohjain Festo CMMP-AS

Vahvistin/ohjain Festo CMMP-AS

Tuotenumero: T18106802

CMMP-AS-…-M0 – Without slot. The plug assortment NEKM is included in the scope of delivery of the motor controller.
CMMP-AS-…-M3 – With 3 slots. One of the plug-in cards must be inserted in slot 7 in order to operate the motor controller.
Possible plug-in cards:
– CAMC-DS-M1
– CAMC-G-S1
– CAMC-G-S3
For the CMMP-AS-C15…, the mains filter is mandatory for compliance with the CE and EN standards. The plug assortment NEKM is included in the scope of delivery of the motor controller.

Vahvistin/ohjain Festo CMMP-AS

Vahvistin/ohjain Festo CMMP-AS

Vahvistin/ohjain Festo CMMP-AS

Vahvistin/ohjain Festo CMMP-AS

Vahvistin/ohjain Festo CMMP-AS

Moottorin valvonta Festo CMMO-ST

Moottorin valvonta Festo CMMO-ST

Tuotenumero: T18106812

The motor controller CMMO-ST is a closed-loop and open-loop position controller. Separate load and logic supply. Supports the safety function “safe torque off" (STO).
Easy actuation via:
– I/O interface
– IO-Link or I-Port
– Modbus TCP
Monitoring of freely defined positions and torque ranges. Backup file enables seamless device replacement. H-rail mounting possible. Encoder option (closed loop), in other words no step losses, following errors are corrected.
Parameterisation possible via:
Configuration package FCT (Festo Configuration Tool)
Ethernet interface with integrated web server

Moottorin valvonta Festo CMMO-ST

Väylämoduuli Festo CTEU

Väylämoduuli Festo CTEU

Tuotenumero: T18107219

CTEU fieldbus modules for valve terminals. Festo-specific interface (I-Port). Input modules CTSL for detecting sensor signals. Connection for the installation system CPI from Festo. Direct and easy networking of valve terminals and other devices via a bus connection. Wide range of applications thanks to high degree of protection to IP65/67. Universal connection technology (Sub-D, M12, terminal strip). Optional decentralised installation of bus node for connecting two valve terminals. Basic diagnostics: undervoltage, short circuit. CTEU for the universal use of valve terminals. The Festo-specific, uniformly defined interface (I-Port) enables the fieldbus modules to be used for different types of valve terminal.

Väylämoduuli Festo CTEU

Väylämoduuli Festo CTEU

Väylämoduuli Festo CTEU

Väylämoduuli Festo CTEU

Väylämoduuli Festo CTEU

Lisätarvikkeet Festo CTEU/CTEL

Lisätarvikkeet Festo CTEU/CTEL

Tuotenumero: T18100688

Universal plug connector - Electric cables and connectors

Lisätarvikkeet Festo CTEU/CTEL

Lisätarvikkeet Festo CTEU/CTEL

Lisätarvikkeet Festo CTEU/CTEL

Lisätarvikkeet Festo CTEU/CTEL

Lisätarvikkeet Festo CTEU/CTEL

Asemointilaite Festo CMSX

Asemointilaite Festo CMSX

Tuotenumero: T18107417

Voltage 21.6 … 26.4 V DC. Temperature range –5 … +60 °C. Flow rate 50 … 130 l/min.

Asemointilaite Festo CMSX

Asemointilaite Festo CMSX

Asemointilaite Festo CMSX

Asemointilaite Festo CMSX

Stop soft -ohjain Festo SPC11

Stop soft -ohjain Festo SPC11

Tuotenumero: T18104370

Teach-in travel to determine the system characteristic values and end positions can be started either using a button on the end-position controller SPC11 or via an output (e.g. of the PLC) externally routed via the control cable.

Stop soft -ohjain Festo SPC11

Stop soft -ohjain Festo SPC11

Käyttöyksiköt Festo CDPX

Käyttöyksiköt Festo CDPX

Tuotenumero: T18106264

Ambient temperature [°C] 0 … 50
Storage temperature [°C] –20 … 70
Relative air humidity [%] 5 … 85
Non-condensing
CE marking (see declaration of conformity) In accordance with EU EMC Directive1)
Certification cULus listed (OL)
C-Tick
Protection class IP20
Note on materials Conforms to RoHS

Käyttöyksiköt Festo CDPX

Kontrollerikotelo Festo CPX-CMAX

Kontrollerikotelo Festo CPX-CMAX

Tuotenumero: T18105046

Order code in the CPX configurator: T21

Soft-stop -ohjain Festo CPX-CMPX

Soft-stop -ohjain Festo CPX-CMPX

Tuotenumero: T18105045

Order code in the CPX configurator: T20

Ohjearvoyksikkö Festo MPZ

Ohjearvoyksikkö Festo MPZ

Tuotenumero: T18104916

Function: Generation of 6+1 analogue setpoint values for the proportional pressure regulators MPPES, VPPM, VPPE and MPYE. Digital activation. Output voltage adjustable via spindle potentiometer. Voltage 20 … 30 V DC

Koppa Festo CAFC

Koppa Festo CAFC

Tuotenumero: T18106047

Hood section for CPX terminal including mounting attachments for connecting several hood sections in series.

Koppa Festo CAFC

Koppa Festo VMPA-KMS-H

Koppa Festo VMPA-KMS-H

Tuotenumero: T18104089

Plug socket for multi-pin connection (to valve terminal type 32 MPA). Can be fabricated with any cable lengths. 25-pin. Sub-D.

Pulssigeneraattori Festo VLG

Pulssigeneraattori Festo VLG

Tuotenumero: T18100113

Pulse generator

Asemointilaite Festo CMSH

Asemointilaite Festo CMSH

Tuotenumero: 38416550

The CMSH is an intelligent, digital positioner. It controls the position of a process valve that is actuated by a pneumatic actuator. Thanks to the large ambient temperature range of –40 ... +80°C and its high degree of protection (IP66/67), it can also be used under harsh operating conditions. The CMSH is a 4 ... 20mA loop-powered 2-wire device. An additional power supply is therefore not required. Configuration and operation can be performed locally on an LC display using operating buttons. A HART interface permits remote access and integration into higher-level systems. There are
product variants for single- or double acting actuators with safety settings (fail safe, fail in place). The product is suitable for attachment to actuators with a mechanical interface in accordance
with VDI/VDE 3845-1 (IEC 60534-6-2) or VDI/VDE 3847-2. The product variant CMSH-S-... has an internal position sensor for detecting displacement/angle. Alternatively, an external potentiometric
position sensor can be connected to the positioner on all product variants

Asemointilaite Festo CMSH

Asemointilaite Festo CMSH

Vahvistin/ohjain Festo CMMT-AS

Vahvistin/ohjain Festo CMMT-AS

Tuotenumero: 75443176

Tekniset tiedot ks. kohta dokumentit.

Vahvistin/ohjain Festo CMMT-AS