Ahlsell
Tilausrivit 0
Pikatilaus
AhlsellTuotteetTeollisuusPaineilmaPneumatiikkaIlman esikäsittelyIlman esikäsittely FestoKäynnistys/pysäytysventtiilit Festo

Käynnistys/pysäytysventtiilit Festo

Pehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarja
Festo
Pehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarja
Tuotenumero: T18005115
Flow rate 4,300 l/min. Temperature range –10 … +50 °C. Operating pressure 3.5 … 10 bar
The electro-pneumatic soft-start and quick exhaust valve is used to reduce pressure quickly and reliably and to build up pressure gradually in industrial pneumatic systems and terminals. The device is a self-testing, redundant mechatronic system conforming to the requirements of EN ISO 13849-1. The safety-related pneumatic protection objective of safe venting is also guaranteed in the event of faults inside the valve (e.g. due to wear, contamination, electronic faults). Thanks to the 2-channel design and its monitoring, the device fulfils controller category 3 and 4 requirements. This enables a performance level of max. "e" to be attained. The device receives the secure enable signals (EN1/EN2) via the electrical connection (multi-pin plug socket NECA Sub-D, 9-pin or AS-i connecting cable). The signals in question come from commercially available electronic or electromechanical safety switching devices which monitor the protective equipment of the machine (e.g. emergency stop, light curtain, electrical door switch of a protective enclosure, etc.).
Pehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarjaPehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarjaPehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarja
Pehmokäynnistysventtiili Festo MS4/MS6-DE MS-sarja
Festo
Pehmokäynnistysventtiili Festo MS4/MS6-DE MS-sarja
Tuotenumero: T18005032
Flow rate 1,000 … 6,450 l/min. Temperature range –10 … +60 °C. Operating pressure 4 … 18 bar.
The duration of the pressure build-up is adjusted using the restrictor attached to the valve cap. The output pressure p2 rises slowly in accordance with the restrictor setting. Only the air flow from the restrictor is available when the solenoid valve is not actuated. The main seat is only opened by energising the solenoid valve. When the solenoid valve is switched off, the main seat is closed and only the air flow from the flow control valve is available. The solenoid valve should remain switched on in order to vent a system as this increases the flow rate from 2 and 1 and reduces the exhaust time. Solenoid actuated soft-start valve for slowly pressurising and venting pneumatic installations. The drives advance slowly and reliably into the initial position. Sudden and erratic movements are avoided. With solenoid coil without plug socket. Switch-through pressure can be precisely controlled using a solenoid valve. Adjustable switching time delay. Three voltage ranges can be selected. Non-detenting and detenting manual override (variant 10V24: only non-detenting). Solenoid actuator can be repositioned by 180°. Optional pressure sensor. Optional device variant EX2 for use in potentially explosive areas in zones 2 and 22
Pehmokäynnistysventtiili Festo MS4/MS6-DE MS-sarjaPehmokäynnistysventtiili Festo MS4/MS6-DE MS-sarjaPehmokäynnistysventtiili Festo MS4/MS6-DE MS-sarjaPehmokäynnistysventtiili Festo MS4/MS6-DE MS-sarja
Pehmokäynnistysventtiili Festo MS4/MS6-DL MS-sarja
Festo
Pehmokäynnistysventtiili Festo MS4/MS6-DL MS-sarja
Tuotenumero: T18005056
Flow rate 1,000 … 6,450 l/min. Temperature range –10 … +60 °C. Operating pressure 4 … 18 bar.
The duration of the pressure build-up is adjusted using the restrictor attached to the valve cap. The output pressure p2 rises slowly in accordance with the restrictor setting. The main seat opens when the switchthrough pressure is reached. Pneumatically actuated soft-start valve for slowly pressurising and venting pneumatic installations (for use with on-off valves EM1 and EE). The drives advance slowly and reliably into the initial position. Sudden and erratic movements are avoided. Pressure switching approx. 50% of operating pressure. Adjustable switching time delay. Optional pressure sensor.Optional device variant EX4 for use in potentially explosive areas in
zones 1, 2, 21 and 22.
Pehmokäynnistysventtiili Festo MS4/MS6-DL MS-sarjaPehmokäynnistysventtiili Festo MS4/MS6-DL MS-sarjaPehmokäynnistysventtiili Festo MS4/MS6-DL MS-sarja